Printed Circuit Board routing
SolStice Engineering & Manufacturing Services
Printed Circuit Memory Board
Site Map     Terms of Use     Privacy Policy     Contact
KEY FEATURES
  • Can function as Access Point or Wireless Ethernet Bridge
  • Compact size
  • Accept 6-15 volt DC, which is suitable for vehicle mounting
  • Can be incorporated into different product e.g., weighing scale, vending machine, surveillance camera, etc.
  • Wireless isolation between wireless clients
  • MAC address Access Control

WIRELESS FEATURES
  • IEEE 802.11g compliant radio, up to 54 Mbps
  • RF Power Control. transmit power adjusted by software control between 100% to 12.5% of maximum radio power
  • Remote Access Point Association Control
  • Support seamless roaming with the same subnet between Access Point (in repeater and client mode)

NETWORK (Internet & Intranet)
  • Protocol filtering

SECURITY & ACCESS CONTROL FOR ACCESS POINT MODE
  • Support static WLAN WEP up to 152 bits encryption
  • MAC Address Control
  • WPA with Radius Server for EAP-TLS, EAP-TTLS and EAP PEAP
  • WPA-PSK (AES & TKIP) In Access Point Mode
  • Wireless to wireless user isolation

MANAGEMENT
  • Web-based management
  • IP address discovery software
  • Firmware upgradeable through web-server telnet

HARDWARE
  • Antenna connector: 50-ohm, reverse SMA female antenna connector
  • Chassis Type: Desktop mounting
  • Ethernet Port: One 10/1000 Base-T (RJ-45 connector) with auto MDIX

POWER SPECIFICATIONS
  • Power adapter: 5-15 Volts DC
  • Power consumption: Typical is 5.o Watts, Max Watts: 5.5

RF SPECIFICATIONS














ENVIRONMENT
  • Operating temperature: O°C to 45°C ambient temperature
  • Relative humidity when operational: 20-90% (non-condensing)
  • Storage temperature: -20°C to +75°C ambient temperature
  • Relative humidity during storage: 95% Max (non-condensing)

STANDARD PACKAGE
  • The standard package for AP-1001g comes with the following:
           AP-1001g
           2 dBi Antenna
        9V 1000mA Power Adapter
802.11g Wireless LAN Access Point & Ethernet Bridge
(Model# AP-1001G)
Frequency Range:
 2.4 – 2.4835 GHz
Wireless Data Rate:
 54, 48, 36, 24, 18, 12, 11, 9, 6,  5.5,    2, 1 Mbps (108Mbps for Turbo mode)
Channels:
 11 channels (USA/Canada), 13 channels (Singapore, Europe, except France), 14
channels (Japan)
Transmitter Output Power:
 17dBm ± 2dBm
Nominal Antenna Port Impedance:
 50Ω (for external antenna connector, if applicable)
Media Access Protocol:
 CSMA/CA with ACK
Modulation Technique:
 OFDM, CCK, DQPSK, DBPSK
☼
☼
☼
☼
☼
Copyright © 2010  SolStice EMT LLC.  All rights reserved.